You are here

Android Phone/Tablet - Android 11

Because of the many versions of the Android operating system, the exact steps may vary slightly depending on your device. If you are unable to connect using the steps below, refer to the Troubleshooting section.



1 of

4 Steps

  1. Go to Settings . 
  2. Under “Wireless and Networks”, make sure "Wi-Fi" is turned on, then tap Wi-Fi.
  3. From the list of available networks, select TUsecurewireless or TUresnet.
  4. On the TUsecurewireless or TUresnet connect screen, fill in the settings indicated in the text below, as well as shown in the screen shot provided:   a) Verify that EAP method is set to PEAP. b) Set Phase 2 authentication to MSCHAPV2. c) For CA certificate, select Use system certificates. d) for Online Certificate Status, select Do not validate. e) If you see Domain, type: f) For Identity, enter your AccessNet username. g) In the Password box, enter your AccessNet password. h) Then tap Connect.